For Nissan Qashqai J11 Chrome Lower Front Grille 2013 To 2017 S. Steel ---- Chromium Styling Bumper Side Skirts Front lip Diffuser

Installation Instructions: 1) Perform installation in a dry and dust-free environment. 2) Before installation, test the double-sided tapes on the area where they will be applied without opening the protective film on the product. 3) The ambient temperature during installation should be between 15°C and 35°C. If the ambient temperature is below 15°C, perform installation by heating the surface with a hair dryer etc. 4) Clean the surface to be bonded meticulously with a cotton cloth, rubbing alcohol or pure alcohol. After cleaning the surface to be bonded, protect it from dust and oil. DO NOT clean the surface to be bonded with oily and additives such as wet wipes, water, thinner, gasoline, diesel oil, cologne. 5) After applying the cleaning process to the surface to be bonded, wait 5 minutes and then start the bonding process. 6) Remove the protective surface of the double-sided tape on the product and perform the installation starting from the oval and closed surface again. 7) During the installation process, place the product by patting it with a soft cloth or your fingertips. Apply pressure to the part for one minute and again with a hair dryer etc. Apply heat with the help of. PLEASE NOTE: Since the tape used will show its full properties within 24 hours, use the glued part carefully during this period. To prevent the glued part from loosening, tape it with paper or packaging tape that you can remove after 24 hours. Be careful not to wash your car within 24 hours. WE WISH YOU A HAPPY SHOPPING...